dmesg - Intel Atom N450
Linux version 5.10.142-antix.2-amd64-smp (anticap@L412) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT Fri Sep 9 21:15:01 EEST 2022
Disabled fast string operations
x86/fpu: x87 FPU will use FXSAVE
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007f493fff] usable
BIOS-e820: [mem 0x000000007f494000-0x000000007f4befff] reserved
BIOS-e820: [mem 0x000000007f4bf000-0x000000007f578fff] usable
BIOS-e820: [mem 0x000000007f579000-0x000000007f5befff] ACPI NVS
BIOS-e820: [mem 0x000000007f5bf000-0x000000007f5eafff] usable
BIOS-e820: [mem 0x000000007f5eb000-0x000000007f5fefff] ACPI data
BIOS-e820: [mem 0x000000007f5ff000-0x000000007f5fffff] usable
BIOS-e820: [mem 0x000000007f600000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Acer AOD260 /AOD260 , BIOS V3.16(DDR2) 11/07/2011
tsc: Fast TSC calibration failed
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x7f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-through
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFF00000 mask 0FFF00000 write-protect
1 base 000000000 mask 0C0000000 write-back
2 base 040000000 mask 0C0000000 write-back
3 base 07F800000 mask 0FF800000 uncachable
4 disabled
5 disabled
6 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
RAMDISK: [mem 0x32f89000-0x357bbfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
ACPI: XSDT 0x000000007F5FE120 000064 (v01 ACRSYS ACRPRDCT 00000001 01000013)
ACPI: FACP 0x000000007F5FD000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: DSDT 0x000000007F5F0000 009587 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: FACS 0x000000007F586000 000040
ACPI: FACS 0x000000007F586000 000040
ACPI: HPET 0x000000007F5FC000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: APIC 0x000000007F5FB000 000078 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: MCFG 0x000000007F5FA000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: SLIC 0x000000007F5EF000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: BOOT 0x000000007F5EE000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: SSDT 0x000000007F5EC000 0004C4 (v02 PmRef CpuPm 00003000 INTL 20051117)
ACPI: WDAT 0x000000007F5EB000 000194 (v01 INSYDE INSYDE 00000001 MSFT 01000013)
ACPI: Reserving FACP table memory at [mem 0x7f5fd000-0x7f5fd0f3]
ACPI: Reserving DSDT table memory at [mem 0x7f5f0000-0x7f5f9586]
ACPI: Reserving FACS table memory at [mem 0x7f586000-0x7f58603f]
ACPI: Reserving FACS table memory at [mem 0x7f586000-0x7f58603f]
ACPI: Reserving HPET table memory at [mem 0x7f5fc000-0x7f5fc037]
ACPI: Reserving APIC table memory at [mem 0x7f5fb000-0x7f5fb077]
ACPI: Reserving MCFG table memory at [mem 0x7f5fa000-0x7f5fa03b]
ACPI: Reserving SLIC table memory at [mem 0x7f5ef000-0x7f5ef175]
ACPI: Reserving BOOT table memory at [mem 0x7f5ee000-0x7f5ee027]
ACPI: Reserving SSDT table memory at [mem 0x7f5ec000-0x7f5ec4c3]
ACPI: Reserving WDAT table memory at [mem 0x7f5eb000-0x7f5eb193]
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007f5fffff]
NODE_DATA(0) allocated [mem 0x7f5d4000-0x7f5eafff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x000000007f5fffff]
Normal empty
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000007f493fff]
node 0: [mem 0x000000007f4bf000-0x000000007f578fff]
node 0: [mem 0x000000007f5bf000-0x000000007f5eafff]
node 0: [mem 0x000000007f5ff000-0x000000007f5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000007f5fffff]
On node 0 totalpages: 521497
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 8088 pages used for memmap
DMA32 zone: 517499 pages, LIFO batch:63
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 97 pages in unavailable ranges
On node 0, zone DMA32: 43 pages in unavailable ranges
On node 0, zone DMA32: 70 pages in unavailable ranges
On node 0, zone DMA32: 20 pages in unavailable ranges
On node 0, zone DMA32: 2560 pages in unavailable ranges
Reserving Intel graphics memory at [mem 0x7f800000-0x7fffffff]
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x7f494000-0x7f4befff]
PM: hibernation: Registered nosave memory: [mem 0x7f579000-0x7f5befff]
PM: hibernation: Registered nosave memory: [mem 0x7f5eb000-0x7f5fefff]
[mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288
pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 513324
Policy zone: DMA32
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 1972664K/2085988K available (16395K kernel code, 2335K rwdata, 3688K rodata, 2120K init, 2924K bss, 113068K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 46181 entries in 181 pages
ftrace: allocated 181 pages with 5 groups
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
rcu: RCU priority boosting: priority 1 delay 500 ms.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
rcu: Offload RCU callbacks from CPUs: (none).
Console: colour VGA+ 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200925
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 1662.585 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x17f716ac4f2, max_idle_ns: 440795266682 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.17 BogoMIPS (lpj=1662585)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
SELinux: Initializing.
TOMOYO Linux initialized
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
Disabled fast string operations
process: using mwait in idle threads
Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
Freeing SMP alternatives memory: 44K
smpboot: CPU0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz (family: 0x6, model: 0x1c, stepping: 0xa)
Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
rcu: Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
Disabled fast string operations
smp: Brought up 1 node, 2 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 2 processors activated (6650.34 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x7f579000-0x7f5befff] (286720 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1670301426.169:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0x44 set to 0x1
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
Kprobes globally optimized
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
raid6: sse2x4 gen() 2805 MB/s
raid6: sse2x4 xor() 908 MB/s
raid6: sse2x2 gen() 2279 MB/s
raid6: sse2x2 xor() 1697 MB/s
raid6: sse2x1 gen() 1605 MB/s
raid6: sse2x1 xor() 1277 MB/s
raid6: using algorithm sse2x4 gen() 2805 MB/s
raid6: .... xor() 908 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF888003CB6000 0001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF888003CB6A00 0001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8880037AFD00 0000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8880037AB480 000083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC_.EC0_: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 12 GPEs in block 00 to 1F
ACPI: Power Resource [FN00] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x98180000-0x981fffff]
pci 0000:00:02.0: reg 0x14: [io 0x60c0-0x60c7]
pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
pci 0000:00:02.0: reg 0x1c: [mem 0x98000000-0x980fffff]
pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
pci 0000:00:02.1: reg 0x10: [mem 0x98100000-0x9817ffff]
pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0x98200000-0x98203fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x6080-0x609f]
pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x6060-0x607f]
pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x6040-0x605f]
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0x6020-0x603f]
pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0x98204400-0x982047ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x60b8-0x60bf]
pci 0000:00:1f.2: reg 0x14: [io 0x60cc-0x60cf]
pci 0000:00:1f.2: reg 0x18: [io 0x60b0-0x60b7]
pci 0000:00:1f.2: reg 0x1c: [io 0x60c8-0x60cb]
pci 0000:00:1f.2: reg 0x20: [io 0x60a0-0x60af]
pci 0000:00:1f.2: reg 0x24: [mem 0x98204000-0x982043ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io 0x6000-0x601f]
pci 0000:01:00.0: [1969:1062] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0x97000000-0x9703ffff 64bit]
pci 0000:01:00.0: reg 0x18: [io 0x5000-0x507f]
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0x97000000-0x97ffffff]
pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0x96000000-0x9600ffff 64bit]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0x96000000-0x96ffffff]
pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
pci_bus 0000:05: extended config space not accessible
pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: GPE=0x19
ACPI: \_SB_.PCI0.LPC_.EC0_: Boot DSDT EC initialization complete
ACPI: \_SB_.PCI0.LPC_.EC0_: EC: Used to handle transactions and events
iommu: Default domain type: Translated
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7f494000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f579000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f5eb000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f600000-0x7fffffff]
hpet: 3 channels of 0 reserved for per-cpu timers
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: [io 0x0600-0x060f] has been reserved
system 00:00: [io 0x0610] has been reserved
system 00:00: [io 0x0800-0x080f] has been reserved
system 00:00: [io 0x0810-0x0817] has been reserved
system 00:00: [io 0x0400-0x047f] has been reserved
system 00:00: [io 0x0500-0x053f] has been reserved
system 00:00: [io 0xff2c-0xff2f] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs ETD0500 PNP0f13 (active)
pnp: PnP ACPI: found 4 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered protocol family 2
IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0x97000000-0x97ffffff]
pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0x96000000-0x96ffffff]
pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:01: resource 1 [mem 0x97000000-0x97ffffff]
pci_bus 0000:01: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0x96000000-0x96ffffff]
pci_bus 0000:02: resource 2 [mem 0x91000000-0x91ffffff 64bit pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 7 [mem 0x80000000-0xfebfffff window]
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 41164K
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=37 max_order=19 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.32)
xor: measuring software checksum speed
prefetch64-sse : 6184 MB/sec
generic_sse : 5522 MB/sec
xor: using function: prefetch64-sse (6184 MB/sec)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Asymmetric key parser 'pkcs8' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:1c.0: PME: Signaling with IRQ 24
pcieport 0000:00:1c.1: PME: Signaling with IRQ 25
intel_idle: MWAIT substates: 0x20220
intel_idle: v0.5.1 model 0x1C
tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
clocksource: Switched to clocksource hpet
intel_idle: Local APIC timer is reliable in C1
Linux agpgart interface v0.103
AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m1024@0x98204000 port 0x98204100 irq 26
ata2: SATA max UDMA/133 abar m1024@0x98204000 port 0x98204180 irq 26
ata3: DUMMY
ata4: DUMMY
scsi host4: pata_legacy
ata5: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: unexpected _GTF length (4)
ata1.00: ATA-8: WDC WD1600BEVT-22A23T0, 01.01A01, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: unexpected _GTF length (4)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVT-2 1A01 PQ: 0 ANSI: 5
scsi 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link down (SStatus 0 SControl 300)
scsi host4: pata_legacy
ata6: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 22, io mem 0x98204400
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.10.142-antix.2-amd64-smp ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 18, io base 0x00006080
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 5.10.142-antix.2-amd64-smp uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006060
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 5.10.142-antix.2-amd64-smp uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006040
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 5.10.142-antix.2-amd64-smp uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 22, io base 0x00006020
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 5.10.142-antix.2-amd64-smp uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: setting system clock to 2022-12-06T04:37:10 UTC (1670301430)
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
intel_pstate: CPU model not supported
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
usbcore: registered new interface driver vub300
sdhci-pltfm: SDHCI platform and OF driver helper
ledtrig-cpu: registered to indicate activity on CPUs
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
microcode: sig=0x106ca, pf=0x4, revision=0x107
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Btrfs loaded, crc32c=crc32c-generic
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
RAS: Correctable Errors collector initialized.
Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 2120K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image (text/rodata gap) memory: 2036K
Freeing unused kernel image (rodata/data gap) memory: 408K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-5.10.142-antix.2-amd64-smp
usb 1-4: new high-speed USB device number 2 using ehci-pci
usb 1-4: New USB device found, idVendor=0402, idProduct=9665, bcdDevice= 0.09
usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=0
usb 1-4: Product: 1.3M WebCam
usb 1-4: Manufacturer: XPA5Z0NE1
udevd[162]: starting version 3.2.11
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
udevd[163]: starting eudev-3.2.11
video: module verification failed: signature and/or required key missing - tainting kernel
random: udevd: uninitialized urandom read (16 bytes read)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (53 C)
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20200925/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053E (\GPIO) (20200925/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053E (\GPIO) (20200925/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
lpc_ich 0000:00:1f.0: No MFD cells added
battery: ACPI: Battery Slot [BAT0] (battery absent)
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
i2c i2c-0: 1/1 memory slots populated (from DMI)
i2c i2c-0: Successfully instantiated SPD at 0x50
psmouse serio1: elantech: assuming hardware version 2 (with firmware version 0x140200)
psmouse serio1: elantech: Synaptics capabilities query result 0x68, 0x18, 0x0b.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
psmouse serio1: elantech: Elan sample query result 01, 00, 00
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input2
Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
random: crng init done
udevd[419]: starting version 3.2.11
udevd[419]: starting eudev-3.2.11
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
pci 0000:00:1e.0: PCI bridge to [bus 05]
pci 0000:00:1e.0: PCI bridge to [bus 05]
ACPI: AC Adapter [AC] (on-line)
pci 0000:00:1e.0: PCI bridge to [bus 05]
pci 0000:00:1e.0: PCI bridge to [bus 05]
pci 0000:00:1e.0: PCI bridge to [bus 05]
pci 0000:00:1e.0: PCI bridge to [bus 05]
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Function bitmap for Communication Button: 0x1
at24 0-0050: supply vcc not found, using dummy regulator
input: Acer WMI hotkeys as /devices/virtual/input/input7
at24 0-0050: 256 byte spd EEPROM, read-only
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
pci 0000:00:00.0: Intel GMA3150 Chipset
pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
pci 0000:00:00.0: detected 8192K stolen memory
i915 0000:00:02.0: vgaarb: deactivate vga console
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
i915 0000:00:02.0: [drm] Initialized overlay support.
[drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
intel_powerclamp: No package C-state available
ath: phy0: Enable LNA combining
intel_powerclamp: No package C-state available
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90000460000, irq=17
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
acpi device:24: registered as cooling_device3
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
fbcon: i915drmfb (fb0) is primary device
wl: loading out-of-tree module taints kernel.
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Console: switching to colour frame buffer device 128x37
i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device 1.3M WebCam (0402:9665)
input: 1.3M WebCam: 1.3M WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Adding 3145724k swap on /dev/sda2. Priority:-2 extents:1 across:3145724k FS
EXT4-fs (sda1): re-mounted. Opts: (null)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
Key type encrypted registered
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 2/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 2/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: associate with e4:8d:8c:cb:c8:37 (try 2/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: associate with e4:8d:8c:cb:c8:37 (try 2/3)
wlan0: associate with e4:8d:8c:cb:c8:37 (try 3/3)
wlan0: association with e4:8d:8c:cb:c8:37 timed out
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticated from e4:8d:8c:cb:c8:37 (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: deauthenticated from e4:8d:8c:cb:c8:37 (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: associate with e4:8d:8c:cb:c8:37 (try 2/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
traps: cmTC_36d56[8522] trap invalid opcode ip:561e88c3412d sp:7ffc9c0650a0 error:0 in cmTC_36d56[561e88c34000+1000]
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: deauthenticated from e4:8d:8c:cb:c8:37 (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: deauthenticated from e4:8d:8c:cb:c8:37 (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: associate with e4:8d:8c:cb:c8:37 (try 2/3)
wlan0: associate with e4:8d:8c:cb:c8:37 (try 3/3)
wlan0: association with e4:8d:8c:cb:c8:37 timed out
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 2/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: deauthenticated from e4:8d:8c:cb:c8:37 (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: deauthenticated from e4:8d:8c:cb:c8:37 while associating (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: associate with e4:8d:8c:cb:c8:37 (try 2/3)
wlan0: associate with e4:8d:8c:cb:c8:37 (try 3/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 2/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticated from e4:8d:8c:cb:c8:37 (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: deauthenticated from e4:8d:8c:cb:c8:37 (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: associate with e4:8d:8c:cb:c8:37 (try 2/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: deauthenticated from e4:8d:8c:cb:c8:37 (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: associate with e4:8d:8c:cb:c8:37 (try 2/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: deauthenticated from e4:8d:8c:cb:c8:37 (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: associate with e4:8d:8c:cb:c8:37 (try 2/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticated from e4:8d:8c:cb:c8:37 (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticated from e4:8d:8c:cb:c8:37 (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
wlan0: deauthenticated from e4:8d:8c:cb:c8:37 (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
traps: stockfish[30517] trap invalid opcode ip:55d6acf74dc9 sp:7ffd40005e40 error:0 in stockfish[55d6acf71000+91000]
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: associate with e4:8d:8c:cb:c8:37 (try 2/3)
wlan0: associate with e4:8d:8c:cb:c8:37 (try 3/3)
wlan0: association with e4:8d:8c:cb:c8:37 timed out
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: associate with e4:8d:8c:cb:c8:37 (try 2/3)
wlan0: associate with e4:8d:8c:cb:c8:37 (try 3/3)
wlan0: association with e4:8d:8c:cb:c8:37 timed out
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 2/3)
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 3/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 2/3)
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 3/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: associate with e4:8d:8c:cb:c8:37 (try 2/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: deauthenticating from e4:8d:8c:cb:c8:37 by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 2/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: associate with e4:8d:8c:cb:c8:37 (try 2/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: deauthenticating from e4:8d:8c:cb:c8:37 by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: deauthenticating from e4:8d:8c:cb:c8:37 by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: deauthenticating from e4:8d:8c:cb:c8:37 by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 2/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: deauthenticated from e4:8d:8c:cb:c8:37 (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 2/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: associate with e4:8d:8c:cb:c8:37 (try 2/3)
wlan0: associate with e4:8d:8c:cb:c8:37 (try 3/3)
wlan0: association with e4:8d:8c:cb:c8:37 timed out
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: deauthenticated from e4:8d:8c:cb:c8:37 (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element
wlan0: deauthenticated from e4:8d:8c:cb:c8:37 (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with e4:8d:8c:cb:c8:37
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: send auth to e4:8d:8c:cb:c8:37 (try 2/3)
wlan0: authenticated
wlan0: associate with e4:8d:8c:cb:c8:37 (try 1/3)
wlan0: RX AssocResp from e4:8d:8c:cb:c8:37 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8188
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x40
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ath: regdomain 0x8188 dynamically updated by country element